- 586
- 5 095 767
2FM RC
United States
Приєднався 26 кві 2020
My main goal in starting this channel in 2020 was to start providing honest,non commercial reviews and content of RC products. I was sick of clicking on videos and feeling like they were 100% paid promotions. So I did something about it! I’m not here to sell you products or make a living on UA-cam. I’m here because I love this hobby and I enjoy helping others make good solid decisions with their hard earned money. I’ve always worked hard for my money and know that we all do! So why should you waste it on bogus products? Don’t! Check out my review then make your decisions. Hopefully I can answer a few questions you have and help you make whatever decision you feel fits you best!
Thanks for your time and hope you enjoy!
If you’d like to contact me about trying your products or just questions in general I can be reached at 2fastmattracing@gmail.com
Furitek ESC with Flysky GT5 Integration! Let’s go!!!
Check out the latest from Furitek! A brand new integrated esc that binds up with the Flysky GT5 & Radiomaster MT12!
Pick it up without motor here
furitek.com/products/furitek-python-rxgt5-40a-70a-brushless-esc-w-rx-integration-flysky-fs-gt5-version
Pick it up with motor combo here
furitek.com/products/furitek-torpedo-rxgt5-brushless-power-system-for-redcat-ascent-18-integration-flysky-fs-gt5-version
Redcat Ascent18 found here at amainhobbies
bit.ly/3IzpUGo
I finally have Merch!!
Be sure to check the sizing chart and maybe size up on those Hoodies.
Check it out at the website below!!
2fm-rc-shop.fourthwall.com/collections/all
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/4fwem
FMS Affiliate link here
www.fmshobby.com/jsVeIxtdZHBbau?ref=2FMRC
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref=FaSRjm2T
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
-~-~~-~~~-~~-~-
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
ua-cam.com/video/68cFkrpD4dA/v-deo.html
-~-~~-~~~-~~-~-
Pick it up without motor here
furitek.com/products/furitek-python-rxgt5-40a-70a-brushless-esc-w-rx-integration-flysky-fs-gt5-version
Pick it up with motor combo here
furitek.com/products/furitek-torpedo-rxgt5-brushless-power-system-for-redcat-ascent-18-integration-flysky-fs-gt5-version
Redcat Ascent18 found here at amainhobbies
bit.ly/3IzpUGo
I finally have Merch!!
Be sure to check the sizing chart and maybe size up on those Hoodies.
Check it out at the website below!!
2fm-rc-shop.fourthwall.com/collections/all
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/4fwem
FMS Affiliate link here
www.fmshobby.com/jsVeIxtdZHBbau?ref=2FMRC
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref=FaSRjm2T
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
-~-~~-~~~-~~-~-
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
ua-cam.com/video/68cFkrpD4dA/v-deo.html
-~-~~-~~~-~~-~-
Переглядів: 1 231
Відео
Handmade Bridges for your Crawler Course!
Переглядів 8739 годин тому
Checking out the coolest handmade bridges for our 1/24 & 1/18 trucks out there! Check out Dacers Etsy store here www.etsy.com/shop/WoodworkingByDacer Woodworking by Dacer Facebook page profile.php?id=100091533948350&mibextid=LQQJ4d Woodworking by Dacer Instagram woodworkingbydacer?igsh=cnc4djAwd2VnNXB6 I finally have Merch!! Be sure to check the sizing chart and maybe...
Best SCX24 Servo Yet? Torq MLS-1022 is here! At $45 it’s Hard to Beat!
Переглядів 3 тис.12 годин тому
Checking out a new servo made specifically for the scx24! This thing mounts directly to the axle so it has no ears hanging out,has the wires exiting the case at the rear, and is insanely powerful! Check it out! Pick it up here www.helidirect.com/en-ca/products/torq-mls-1022-high-torque-micro-servo I finally have Merch!! Be sure to check the sizing chart and maybe size up on those Hoodies. Check...
FMS FCX24M! Best New 1/24? Deep Dive,Running & Size Comparison
Переглядів 11 тис.21 годину тому
Taking a good hard look at the new FCX24M! Pulling it apart to see how it’s built. Then taking it out and running it for the first time! Get them here from FaiRC! shrsl.com/4l317 Pick it up here from FMS www.fmshobby.com/products/fms-1-24-fcx24m-land-rover-camel-trophy-edition?ref=i0Io4gJ_t9ISDY FCX24M found here on amazon amzn.to/3RrgdP9 Intro 1:15 bench breakdown begins 2:50 wheel/tire sizes ...
A&M Garage Flat Skid & Anti Wrap Bar install on RC4WD Chevy K10
Переглядів 654День тому
Installing the a&m garage skid and anti-wrap bar for the rc4wd Chevy! Pick up the flat skid here aandmgarage.com/shop/ols/products/tf2-skid-plate Pick up the a&m anti wrap bar here aandmgarage.com/shop/ols/products/pre-order-round-2-rc4wd-tf2-anti-bar-rwb-and-lwb Fusion SE I installed found here alnk.to/6xKdASN ShiftRC Servo I’m running found here alnk.to/5jl1XBi Wheels I’m running found here a...
RC4WD Chevy K10 Interior work! Mods pt.1 #rc4wd #tf2 #rccrawler
Переглядів 3,8 тис.14 днів тому
Doing a little custom interior work on the new Chevy TF2! This is my first attempt at detail on an interior so let’s see how it turns out! Chevy K10 found here alnk.to/3clDKq9 Liquid Chrome Pen found here amzn.to/3KwGU11 Liquid Chrome pen with fine tip (dual tip) amzn.to/3RgswOg Bench Seat I used found here  www.etsy.com/listing/1684046407/ Spray adhesive from Amazon amzn.to/3RiOBf0 00:00 Intr...
New Favorite CHEAP Transmitter? One hand crawling at its best!
Переглядів 1,9 тис.21 день тому
Checking out the HotRC DS-4A! Is it really good for crawling? HotRC transmitter found here amzn.to/4aOohR9 Bat Grip Tape (lots of colors) found here amzn.to/3VpWx0t Thumb grips similar to what I used here amzn.to/459WBVB Light switch I’m using found here amzn.to/4aRKHAJ Rushmore 2024 found here from FairRC! shrsl.com/4k86z Pick it up here from Furitek furitek.com/collections/rtr Don’t forget 2f...
CR18P Rushmore Best Free/Cheap Mods! LCG & Torque Twist fix?
Переглядів 1,3 тис.21 день тому
Making some simple and cheap/free mods to the 2024 Rushmore! Rushmore 2024 found here! shrsl.com/4k86z Plastic I used for esc/receiver trays found here amzn.to/3X6gdIi Batrazzi wheels found here shrsl.com/4k7nc Batrazzi tires found here shrsl.com/4k7ne Pick it up here from Furitek furitek.com/collections/rtr Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!! HELP SUPP...
Hobbyplus CR18P 2024 Rushmore! Lizard Lite Programming & First Run
Переглядів 3,9 тис.21 день тому
Checking out the new Cr18p 2024 from #furitek and #hobbyplus Comparing Torque twist with the Katana and programming the new Lizard Lite Initial thoughts 1:27 closer look 3:30 Programming Lizard Lite 6:14 Torque Twist Test w/Katana 7:55 crawling begins Rushmore 2024 found here from FairRC! shrsl.com/4k86z Pick it up here from Furitek furitek.com/collections/rtr Don’t forget 2fmrc at checkout for...
What was Under the Box?! My “DREAM” RC! What’s next?
Переглядів 1,5 тис.21 день тому
Congrats to the winners! Winners shoot me an email at 2fastmattracing@gmail.com I finally have Merch!! Be sure to check the sizing chart and maybe size up on those Hoodies. Check it out at the website below!! 2fm-rc-shop.fourthwall.com/collections/all Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!! HELP SUPPORT the channel by clicking my affiliate links below and t...
LC80 Gets an Upgrade! Injora Helical Overdrive Gears for the FCX Axles!
Переглядів 1,5 тис.28 днів тому
Checking out the overdrive ring and pinion gears for the FCX24 axles from Injora! Injora Overdrive gears found here (amazon) amzn.to/3R6ztBt Don’t forget 2fmrc05 for a discount on injoras site! Overdrive gears found here (Injora site) www.injora.com/products/injora-alloy-steel-helical-gears-overdrive-gears-for-fms-fcx24-fcx18 Shop FMS here (affiliate link) www.fmshobby.com/i0Io4gJ_t9ISDY I fina...
Injora Lights for SCX6! Super Bright & CHEAP!
Переглядів 465Місяць тому
Injora Lights for SCX6! Super Bright & CHEAP!
Injora 1.3 Wheels & Ascent 1/18 Upgrades!
Переглядів 1,7 тис.Місяць тому
Injora 1.3 Wheels & Ascent 1/18 Upgrades!
Traxxas TRX4MT Budget Speed! Best Speed for your $
Переглядів 4,5 тис.Місяць тому
Traxxas TRX4MT Budget Speed! Best Speed for your $
WovRacing 1/9 Wheelie King! Rooftop Monster Truck?
Переглядів 1,3 тис.Місяць тому
WovRacing 1/9 Wheelie King! Rooftop Monster Truck?
Best CHEAP TRX4M Mod for SPEED! $30 & you can run 3s!
Переглядів 3,7 тис.Місяць тому
Best CHEAP TRX4M Mod for SPEED! $30 & you can run 3s!
Traxxas TRX4MT Monster Truck Size Comparison and Speed runs! Losi LMT & Max Smasher comparisons
Переглядів 3,3 тис.Місяць тому
Traxxas TRX4MT Monster Truck Size Comparison and Speed runs! Losi LMT & Max Smasher comparisons
Beat The Creek Day 2! Meet ups,Vendors Row & SCX6 run!
Переглядів 1,6 тис.Місяць тому
Beat The Creek Day 2! Meet ups,Vendors Row & SCX6 run!
Beat The Creek 2024! Day 1 Trailing & our Night Run
Переглядів 3,5 тис.Місяць тому
Beat The Creek 2024! Day 1 Trailing & our Night Run
Injora Driveshafts for Redcat Ascent 18?
Переглядів 1,1 тис.Місяць тому
Injora Driveshafts for Redcat Ascent 18?
Furitek Torpedo Brushless Redcat Ascent 18! 4s capable? Thoughts and running
Переглядів 3,7 тис.Місяць тому
Furitek Torpedo Brushless Redcat Ascent 18! 4s capable? Thoughts and running
What’s under the box? My new FAVORITE RC! Let’s play a game!
Переглядів 1,7 тис.Місяць тому
What’s under the box? My new FAVORITE RC! Let’s play a game!
Cayman Pro V2! Best Cayman yet? Hmmm idk?
Переглядів 4,2 тис.2 місяці тому
Cayman Pro V2! Best Cayman yet? Hmmm idk?
Furitek 2s Starter Brushless System for Redcat Ascent18!
Переглядів 4,3 тис.2 місяці тому
Furitek 2s Starter Brushless System for Redcat Ascent18!
SCX6 Bouncer Build Part 3! Issues Resolved?
Переглядів 3,3 тис.2 місяці тому
SCX6 Bouncer Build Part 3! Issues Resolved?
Redcat Ascent Metal Underdrive Gears! $25 Gear Set!
Переглядів 1,8 тис.2 місяці тому
Redcat Ascent Metal Underdrive Gears! $25 Gear Set!
Traxxas TRX4 High Trail VS FMS FCX10 K5 1/10! Side by Side Comparison!
Переглядів 9 тис.2 місяці тому
Traxxas TRX4 High Trail VS FMS FCX10 K5 1/10! Side by Side Comparison!
Redcat Ascent Fusion Vs Vanquish VRD Stance! 100% stock vs stock!
Переглядів 17 тис.3 місяці тому
Redcat Ascent Fusion Vs Vanquish VRD Stance! 100% stock vs stock!
Hey Matt, and anybody else reading this, can you ask your 3D buddies and see if there is possibly an adapter that can be figured out, even with some grinding to make this fit on the X15 axles? Thank you, much appreciated.
I love that analysis, FCX24 axle and SCX24 transmission is very much what a furittek Cayman is. The Cayman with brushless is jumpy but if you ajust the app with 50% power foward and reverse and download the latest software it work just like a SCX24 with the benefit of those strong portal. An experience that would be cool would be to try to find a gearing that would make a mullet build work with a front SCX24 axle and a rear FCX24 one. I’ve tried different gearing but have never find one that would slow down the FCX24 rear portal but I’m sure you would find a work around. Big fan of the channel, great job.👍
Will the new 1.0 injora insert fit in these tires?
I just received mine (the Unimog) and to be honest i am disappointed, the transition between a very slow crawl and a quite high speed is extemely abrupt, doesnt look like that on your video. And no settings available for that. None of my other furitek products does that. Also the motor gets as hot as a soldering iron after two minutes of slow crawl. Really a shame, i like the chassis and always wanted a Unimog. Absolutely not possible to crawl if it jumps forward like that.
What radio is 9:37
It’s this one below. Great radio for the price! I have a video on it as well. amzn.to/3VGHLBz
Very nice
Thanks for sharing 😊👍
These look great 👍
Estoy pensando comprar mi primer crawler y creo que elegire este modelo
I enjoy these shorts that you can mix a cool with it. Also great for people with short attention spans.
Id like it with crawler gears
This is what ive been waiting for! I love the simplicity! Definitely scooping this for the new build
i wonder how one of these would do with the same electrics as my scx10 deadbolt
I can’t wait to get my hands on one of these! I know I wanted the defender before, but I think I’d rather have the Range Rover as the Defender is a little over done with other brands.
I totally agree! I kinda want a rover also lol
These look awesome! I have a great place for that on my course i have been working on. Thanks Matt for being an awesome part of our great RC family. I love the way fellow enthusiasts look out for each other. And amazing job to the guy making these! I will let you know when it lands here! Thanks again! -Joe
Can’t wait to see what you think about it!
Good, honest info as always. The prices are way too high for me, but I’m glad they make a good product. I have only a FX118 with Furitek, and while very smooth, won’t pay whole truck prices for just esc/motor. When will we get a video on the sweet Disco with the upgrades back there? Esp curious how different tires worked for you.
800 views should have 800 likes smash that like button
I appreciate ya man!
I have gotta get one of these!
Hey, I’ve had my python pro and cedar set up since it came out for the ascent, just wondering does your motor run pretty hot? Got my drag at 11 and foc @ 20. Noticeably cooler with my drag at 10
Those bridges are super cool!
2:03 couldnt agree more. Out of control is spot on. I run larger rigs more myself. Thanks for the honesty again.
Oh yeah, I'm doing this!! Now we need somebody to design a wheelie bar! Thanks, Matt!!
I’m in but yes it is getting out of hand with aftermarket accessories and my budget.
Both servos are bad the FMS servo seemed ok just trailing around but as soon as I got it wedged a we time it stopped moving I thought it went out but it after sitting for a few seconds it started moving again.
cool idea and i was amped on this till you said the price( i am in newzealand so we have to nearly double the price)...as the std lizard pro/motor/receiver is like 90usd for redcat..yes its the cedar and alloy case but its getting up there as the better combo is i think 150, and you have to have a gt5 radio but other combos just use the included radio or you could get the flysky receiver separately if you upgrade the radio later on ....it is clean tho...damn.
Making electronics smaller usually results in them being more expensive, not less. That coupled with Furitek having the market mostly cornered means they can charge what they want because they know people will buy it regardless. Perks of a free market I suppose.
I like it super cool Matt appreciate your sharing👍👍
YEP. They are the best. I just bought my third Liz Pro/ Micro Komodo setup to put into an SCX 24 6x6 w/ rear steer. You could use a servo y harness with a servo signal reverser for rear steer, but you'd be stuck with rear steer 100% of the time.
139 ?? Seems a bit pricey.i may have missed it, is this one blue tooth ready or do you need your own dongle
Bluetooth built in
That's awesome. Like you and others have said, just wish these kits weren't quite so expensive. I'm just starting to noodle around with my Ascent18, and the "jumpiness" of the stock system is sort of a pain. This looks so smooth.
You may wanna try the underdrive gears from hot racing. I have a set on the way. I think the stock truck is just geared a bit high. With the underdrive front and rear it may help the jumpiness.
does that gt5 radio bind up with the fms electronics?
No. I wish it did!
😢
a fusion motor/esc is almost 1/2 the cost of a furitek motor/esc. that is what itches my brain
Same!
I love my GT5. Wish they were a little more affordable. Have you tried the hotracing transmission under drive gears for the ascent18?
I’ve got some on the way!
@@2fmrc are they different to the redcat set?
@@malcolmlester4585 don’t think so. When I originally ordered it didn’t say the tooth count so I just got them to check out. But after looking around I found them on eBay and it shows they are the same as the redcat underdrive 🤦🏻♂️
@@2fmrc ok..i have the redcat overdrive/underdrive and has helped a little bit.
@@malcolmlester4585 yeah I wish we could get a set that’s a bit more aggressive lol
Hopefully Furitek is also working on Radiolink integration. I removed the GT5 from my life a long time ago because constant problems and lack of customization.
Yeah if it would work with my rc8x all would be good 😆
@@2fmrc My thoughts exactly.
Do you still have an ascent18 with a venom kit in it and have you been having in cogging issues with it? ive ran through multiple tunes and have just been throwing parts at it thinking its gears or bearings and have reached out to both fuirtek and redcat with no real help or response.
No I don’t actually. It’s now got the cedar in it. Hate to hear you’re having issues
@@2fmrc no worries appreciate the response. Starting to wonder if the cedar is what I should have gone with.
Dang, that is expensive! Appreciate your honesty as always. Nice to hear someone acknowledge the downsides to the MT12 radio also. Good info as usual.
Where can i get the bb’s for the mudpit
I got them here www.amazon.com/dp/B0048970A2/ref=cm_sw_r_as_gl_api_gl_i_3YXE1YTWN1HYZR4B91ME?linkCode=ml2&tag=2fmrc-20
I don`t know, why most guys, buys trail scalers and want that they should drive like a comp crawler?! This will NEVER function!!! Drive this rig like the REAL one. This means "SCALE". And second..., most buys RTR`s and than there comes the mods! Makes no sense. If you put the same amount of money in to it, what the vehicle did cost, or even more, buy better a kit. Informativ video although. Ordered the Disco, best lookin in terms of proportions and look. Happy trails...
Yep! These things trail great. I have a hard time taking the easy lines most of the time but I’m starting to enjoy it more and more lol
I havent seen that truck. Is it 18 or 24th?
It’s 1/18. They have them here shrsl.com/4l31q
It’s 1/18. They have them here shrsl.com/4l31q
@2FM RC, great video. My bully 2 should be here today and I plan to do a partial breakdown and rebuild. I had a similar experience with rc4wd when I ordered my c2x.
What they should do is make the bottom slotted and my then use screws to hold the piece that fits into the axle so you can adjust it forward and backward some
Sweet looking bridges matt 🔥🔥🔥😎👍
You're such an awesome dude bro
Those are sick!
Couldn't agree with you anymore about Injora, They really are making some great products.
Awesome, right down the road too🔥🤘
That’s so cool!
Like to see how they're made. Got an idea how to put one together. Maybe I'll find another guy on here that did one.
I've been needing a bridge for my outdoor course. Need to bridge a gap! Hehehe And i simply don't have the time to get intro building it. I'll check them out. Thank you!
Greatly appreciate it! Hope you find something that works for ya. He’s a great guy for sure and makes some awesome bridges!
They do look awesome! I do have an idea of what I could do with it since i dont have a 24 crawler. Gonna put it up on my pegboard as a shelf for when I do get one!
Heck yeah man! We gotta get you into the 1/24 game somehow 😂 It’s on the way!
Hey 2FM RC, always love the content that you put out on your channel! Opened my eyes to the potential of the small scale world and has inspired me to experiment making my own custom creations specifically on as much of a budget as possible. Fallen on hard financial times the past couple years so being able to maintain my 1/10 scales (partly my fault because I abuse the hell out of them lol) let alone buy new ones has really grinded almost to a dead stop. But these 1/24 and 1/18 scale rigs have really been what's keeping my passion for the hobby alive. I was wondering if you had any good suggestions on how to get in contact with people that 3D print parts, accessories, custom things, possibly even bodies/pieces to make existing bodies more complete. I always seem to hit dead ends when reaching out locally and when I do find people available to print, they only do SCX24 stuff. Any advice or info would be a huge help and very much appreciated